added a list of all kscreen attributes that could be added. not all are recorded in the json generated by kscreen-doctor though. need to find another way to get those values.

.gitignore

@@ -0,0 +1,2 @@
+profiles/
+*.json

all_attributes.md

@@ -0,0 +1,30 @@
+# All Kscreen Doctor attributes
+
+- [x] primary
+- [ ] priority
+- [x] enable
+- [x] disable
+- [x] mode
+- [x] position
+- [x] scale
+- [x] orientation / rotation
+- [ ] overscan (0-100)
+- [ ] vrrpolicy (never / always / automatic)
+- [ ] rgbrange (automatic / full / limited)
+- [ ] hdr (enable / disable / toggle)
+- [ ] sdr-brightness (50-10000)
+- [ ] wcg (enable / disable / toggle)
+- [ ] iccprofile (path)
+- [ ] sdrGamut (0-100)
+- [ ] maxBrightnessOverride (disable / int)
+- [ ] maxAverageBrightnessOverride (disable / int)
+- [ ] minBrightnessOverride (disable / int)
+- [ ] colorProfileSource (sRBG / ICC / EDID)
+- [ ] brightness (0-100)
+- [ ] colorPowerTradeoff (preferEfficiency / preferAccuracy)
+- [ ] dimming (0-100)
+- [ ] mirror ( none / output )
+- [ ] ddcCi (allow / disallow)
+- [ ] maxbpc (automatic / 6-16)
+- [ ] edrPolicy (never / always)
+- [ ] sharpness (0 - 100)

apply.sh

@@ -1,15 +0,0 @@
-#!/bin/bash
-
-# Make sure a config file was provided
-if [ $# -lt 1 ]; then
-    echo "Usage: $0 <config file>"
-    exit
-fi
-
-# Attempt to parse the config file
-INPUT_FILE=$1
-echo "Parsing config info from $INPUT_FILE..."
-
-TEST=$(jq '.outputs[]' $INPUT_FILE)
-
-echo $TEST[0]

load-display-profile.sh

@@ -1,5 +1,12 @@
 #!/usr/bin/env bash
 
+VERBOSE=1
+
+function log {
+    if [ $VERBOSE -eq 1 ]; then
+        echo "$@"
+    fi
+}
 set -e
 
 # Make sure a config file was provided
@@ -25,73 +32,135 @@ if ! command -v kscreen-doctor &>/dev/null; then
     exit 1
 fi
 
-
-#######################
-# Parse JSON + restore
-#######################
-
 # Extract outputs list
+enabled_outputs=$(jq -c '.outputs[] | select(.enabled == true)' "$PROFILE")
+disabled_outputs=$(jq -c '.outputs[] | select(.enabled == false)' "$PROFILE")
 outputs=$(jq -c '.outputs[]' "$PROFILE")
 
-# 1. Restore enabled/disabled + basic properties
+# Restore enabled/disabled starting with the enabled monitors
+# Starting with a disabled monitor might not work if it was
+# previously the only enabled monitor
+
+function enable_outputs {
+    local outputs=$1
+
+    # If empty or only whitespace, return early
+    [[ -z "$outputs" ]] && return    
+
     while IFS= read -r out; do
         id=$(echo "$out" | jq -r '.id')
+        log "[VAR] id:" $id
+        name=$(echo "$out" | jq -r '.name')
+        log "[VAR] name:" $name
         enabled=$(echo "$out" | jq -r '.enabled')
+        log "[VAR] enabled:" $enabled
+
+        # Enable/disable
+        if [[ "$enabled" == "true" ]]; then
+            CMD="kscreen-doctor output.$name.enable"
+            log "[CMD]" $CMD
+            $CMD
+        else
+            CMD="kscreen-doctor output.$name.disable"
+            log "[CMD]" $CMD
+            $CMD
+        fi
+    done <<< "$outputs"
+}
+
+log "Enabling enabled outputs..."
+enable_outputs "$enabled_outputs"
+log "Disabling disabled outputs..."
+enable_outputs "$disabled_outputs"
+
+function load_profile_to_outputs {
+    local outputs=$1
+
+    # If empty or only whitespace, return early
+    [[ -z "$outputs" ]] && return
+
+    while IFS= read -r out; do
+        id=$(echo "$out" | jq -r '.id')
+        name=$(echo "$out" | jq -r '.name')
         posx=$(echo "$out" | jq -r '.pos.x')
         posy=$(echo "$out" | jq -r '.pos.y')
         rotation=$(echo "$out" | jq -r '.rotation')
         scale=$(echo "$out" | jq -r '.scale')
-    mode=$(echo "$out" | jq -r '.currentModeId')
+        mode_id=$(echo "$out" | jq -r '.currentModeId')
+        # mode_name=$(echo "$out" | jq -r ".modes[] | select(.id == \"$mode_id\") | .name")
+        # log "[VAR] mode_name:" $mode_name
+        refresh_rate=$(echo "$out" | jq -r ".modes[] | select(.id == \"$mode_id\") | .refreshRate")
+        height=$(echo "$out" | jq -r ".modes[] | select(.id == \"$mode_id\") | .size.height")
+        width=$(echo "$out" | jq -r ".modes[] | select(.id == \"$mode_id\") | .size.width")
+        mode="${width}x${height}@${refresh_rate}"
+        replication_source_id=$(echo "$out" | jq -r ".replicationSource")
+        log "[VAR] replication_source_id: $replication_source_id"
+        if [ $replication_source_id -neq 0 ]; then
+            replication_source_name=$(echo "$outputs.[] | select(.id == \"$replication_source_id\" | .name)" )
+            log "[VAR] replication_source_name: $replication_source_name"
+            CMD="kscreen-doctor output.$"
+        done
+        log "[VAR] mode: $mode" 
         priority=$(echo "$out" | jq -r '.priority')
 
-    # Enable/disable
-    if [[ "$enabled" == "true" ]]; then
-        kscreen-doctor "output.$id.enable"
-    else
-        kscreen-doctor "output.$id.disable"
-        continue
-    fi
+        # 
 
         # Mode (Resolution + refresh)
-    kscreen-doctor "output.$id.mode.$mode"
+        # CMD="kscreen-doctor output.$name.mode.$mode"
+        CMD="kscreen-doctor output.$name.mode.$mode"
+        log "[CMD]" $CMD
+        $CMD
 
         # Position
-    kscreen-doctor "output.$id.position.$posx,$posy"
+        CMD="kscreen-doctor output.$name.position.$posx,$posy"
+        log "[CMD]" $CMD
+        $CMD
 
         # Scale
-    kscreen-doctor "output.$id.scale.$scale"
+        CMD="kscreen-doctor output.$name.scale.$scale"
+        log "[CMD]" $CMD
+        $CMD
         
         # Rotation (map from JSON names to kscreen-doctor options)
+        CMD=""
         case "$rotation" in
-        "1")       kscreen-doctor "output.$id.rotation.normal" ;;
-        "2")     kscreen-doctor "output.$id.rotation.left" ;;
-        "4")      kscreen-doctor "output.$id.rotation.inverted" ;;
-        "8")   kscreen-doctor "output.$id.rotation.right" ;;
+            "1")    CMD="kscreen-doctor output.$name.rotation.normal" ;;
+            "2")    CMD="kscreen-doctor output.$name.rotation.left" ;;
+            "4")    CMD="kscreen-doctor output.$name.rotation.inverted" ;;
+            "8")    CMD="kscreen-doctor output.$name.rotation.right" ;;
         esac
+        log "[CMD]" $CMD
+        $CMD
 
         # Primary / Not Primary
-    echo $priority
         if [ $priority -eq 1 ]; then
-        kscreen-doctor "output.$id.primary"
+            CMD="kscreen-doctor output.$name.primary"
+            log "[CMD]" $CMD
+            $CMD
         fi
 
-
     done <<< "$outputs"
+}
 
-
-#########################
-# 2. Restore clone groups
-#########################
+load_profile_to_outputs "$outputs"
 
 clone_groups=$(jq -c '.clones[]?' "$PROFILE")
 
+function restore_clone_groups {
+    local clone_groups=$1
     while IFS= read -r clone; do
         primary=$(echo "$clone" | jq -r '.[0]')
         others=$(echo "$clone" | jq -r '.[]' | tail -n +2)
 
         for o in $others; do
-        kscreen-doctor "output.$o.clone.$primary"
+            CMD="kscreen-doctor output.$o.clone.$primary"
+            log "[CMD]" $CMD
+            $CMD
+
         done
     done <<< "$clone_groups"
+}
+
+restore_clone_groups "$clone_groups"
 
 echo "Display configuration restored."

load-display-profile2.sh

@@ -1,108 +0,0 @@
-#!/usr/bin/env bash
-
-set -e
-
-# Make sure a config file was provided
-if [ $# -lt 1 ]; then
-    echo "Usage: $0 <config file>"
-    exit
-fi
-
-PROFILE=$1
-
-if [[ ! -f "$PROFILE" ]]; then
-    echo "Profile file not found: $PROFILE" >&2
-    exit 1
-fi
-
-if ! command -v jq &>/dev/null; then
-    echo "jq not installed!" >&2
-    exit 1
-fi
-
-if ! command -v kscreen-doctor &>/dev/null; then
-    echo "kscreen-doctor not found!" >&2
-    exit 1
-fi
-
-
-#######################
-# Parse JSON + ordering
-#######################
-
-# Extract output entries based on positions
-origin_out=$(jq -c '.outputs[] | select(.pos.x == 0 and .pos.y == 0 and .enabled == true)' "$PROFILE")
-non_origin_outs=$(jq -c '.outputs[] | select(.pos.x != 0 or .pos.y != 0 or .enable == false)' "$PROFILE")
-
-#######################
-# Function: Apply output
-#######################
-apply_output() {
-    local out="$1"
-
-    id=$(echo "$out" | jq -r '.id')
-    posx=$(echo "$out" | jq -r '.pos.x')
-    posy=$(echo "$out" | jq -r '.pos.y')
-    rotation=$(echo "$out" | jq -r '.rotation')
-    scale=$(echo "$out" | jq -r '.scale')
-    mode=$(echo "$out" | jq -r '.currentModeId')
-    priority=$(echo "$out" | jq -r '.priority')
-    enabled=$(echo "$out" | jq -r '.enabled')
-
-    # Enable/disable
-    if [[ "$enabled" == "true" ]]; then
-        kscreen-doctor "output.$id.enable"
-    else
-        kscreen-doctor "output.$id.disable"
-        return
-    fi
-
-    # Mode
-    kscreen-doctor "output.$id.mode.$mode"
-
-    # Position
-    kscreen-doctor "output.$id.position.$posx,$posy"
-
-    # Scale
-    kscreen-doctor "output.$id.scale.$scale"
-
-    # Rotation
-    case "$rotation" in
-        "1") kscreen-doctor "output.$id.rotation.normal" ;;
-        "2") kscreen-doctor "output.$id.rotation.left" ;;
-        "4") kscreen-doctor "output.$id.rotation.inverted" ;;
-        "8") kscreen-doctor "output.$id.rotation.right" ;;
-    esac
-
-    # Primary
-    if [ "$priority" -eq 1 ]; then
-        kscreen-doctor "output.$id.primary"
-    fi
-}
-
-if [[ -n "$origin_out" ]]; then
-    apply_output "$origin_out"
-fi
-
-while IFS= read -r out; do
-    apply_output "$out"
-done <<< "$non_origin_outs"
-
-
-
-#########################
-# 3. Restore clone groups
-#########################
-
-clone_groups=$(jq -c '.clones[]?' "$PROFILE")
-
-while IFS= read -r clone; do
-    primary=$(echo "$clone" | jq -r '.[0]')
-    others=$(echo "$clone" | jq -r '.[]' | tail -n +2)
-
-    for o in $others; do
-        kscreen-doctor "output.$o.clone.$primary"
-    done
-done <<< "$clone_groups"
-
-echo "Display configuration restored."