added a list of all kscreen attributes that could be added. not all are recorded in the json generated by kscreen-doctor though. need to find another way to get those values.

.gitignore

@@ -1 +1,2 @@
-profiles/*.json
+profiles/
+*.json

all_attributes.md

@@ -0,0 +1,30 @@
+# All Kscreen Doctor attributes
+
+- [x] primary
+- [ ] priority
+- [x] enable
+- [x] disable
+- [x] mode
+- [x] position
+- [x] scale
+- [x] orientation / rotation
+- [ ] overscan (0-100)
+- [ ] vrrpolicy (never / always / automatic)
+- [ ] rgbrange (automatic / full / limited)
+- [ ] hdr (enable / disable / toggle)
+- [ ] sdr-brightness (50-10000)
+- [ ] wcg (enable / disable / toggle)
+- [ ] iccprofile (path)
+- [ ] sdrGamut (0-100)
+- [ ] maxBrightnessOverride (disable / int)
+- [ ] maxAverageBrightnessOverride (disable / int)
+- [ ] minBrightnessOverride (disable / int)
+- [ ] colorProfileSource (sRBG / ICC / EDID)
+- [ ] brightness (0-100)
+- [ ] colorPowerTradeoff (preferEfficiency / preferAccuracy)
+- [ ] dimming (0-100)
+- [ ] mirror ( none / output )
+- [ ] ddcCi (allow / disallow)
+- [ ] maxbpc (automatic / 6-16)
+- [ ] edrPolicy (never / always)
+- [ ] sharpness (0 - 100)

apply.sh

@@ -1,15 +0,0 @@
-#!/bin/bash
-
-# Make sure a config file was provided
-if [ $# -lt 1 ]; then
-    echo "Usage: $0 <config file>"
-    exit
-fi
-
-# Attempt to parse the config file
-INPUT_FILE=$1
-echo "Parsing config info from $INPUT_FILE..."
-
-TEST=$(jq '.outputs[]' $INPUT_FILE)
-
-echo $TEST[0]

load-display-profile.sh

@@ -1,5 +1,12 @@
 #!/usr/bin/env bash
 
+VERBOSE=1
+
+function log {
+    if [ $VERBOSE -eq 1 ]; then
+        echo "$@"
+    fi
+}
 set -e
 
 # Make sure a config file was provided
@@ -27,11 +34,7 @@ fi
 
 # Extract outputs list
 enabled_outputs=$(jq -c '.outputs[] | select(.enabled == true)' "$PROFILE")
-echo "enabled:"
-echo $enabled_outputs
 disabled_outputs=$(jq -c '.outputs[] | select(.enabled == false)' "$PROFILE")
-echo "disabled:"
-echo $disabled_outputs
 outputs=$(jq -c '.outputs[]' "$PROFILE")
 
 # Restore enabled/disabled starting with the enabled monitors
@@ -40,25 +43,42 @@ outputs=$(jq -c '.outputs[]' "$PROFILE")
 
 function enable_outputs {
     local outputs=$1
+
+    # If empty or only whitespace, return early
+    [[ -z "$outputs" ]] && return    
+
     while IFS= read -r out; do
         id=$(echo "$out" | jq -r '.id')
+        log "[VAR] id:" $id
         name=$(echo "$out" | jq -r '.name')
+        log "[VAR] name:" $name
         enabled=$(echo "$out" | jq -r '.enabled')
+        log "[VAR] enabled:" $enabled
 
         # Enable/disable
         if [[ "$enabled" == "true" ]]; then
-            kscreen-doctor "output.$name.enable"
+            CMD="kscreen-doctor output.$name.enable"
+            log "[CMD]" $CMD
+            $CMD
         else
-            kscreen-doctor "output.$name.disable"
+            CMD="kscreen-doctor output.$name.disable"
+            log "[CMD]" $CMD
+            $CMD
         fi
     done <<< "$outputs"
 }
 
-enable_outputs $enabled_outputs
-enable_outputs $disabled_outputs
+log "Enabling enabled outputs..."
+enable_outputs "$enabled_outputs"
+log "Disabling disabled outputs..."
+enable_outputs "$disabled_outputs"
 
 function load_profile_to_outputs {
     local outputs=$1
+
+    # If empty or only whitespace, return early
+    [[ -z "$outputs" ]] && return
+
     while IFS= read -r out; do
         id=$(echo "$out" | jq -r '.id')
         name=$(echo "$out" | jq -r '.name')
@@ -66,40 +86,63 @@ function load_profile_to_outputs {
         posy=$(echo "$out" | jq -r '.pos.y')
         rotation=$(echo "$out" | jq -r '.rotation')
         scale=$(echo "$out" | jq -r '.scale')
-        mode=$(echo "$out" | jq -r '.currentModeId')
+        mode_id=$(echo "$out" | jq -r '.currentModeId')
+        # mode_name=$(echo "$out" | jq -r ".modes[] | select(.id == \"$mode_id\") | .name")
+        # log "[VAR] mode_name:" $mode_name
+        refresh_rate=$(echo "$out" | jq -r ".modes[] | select(.id == \"$mode_id\") | .refreshRate")
+        height=$(echo "$out" | jq -r ".modes[] | select(.id == \"$mode_id\") | .size.height")
+        width=$(echo "$out" | jq -r ".modes[] | select(.id == \"$mode_id\") | .size.width")
+        mode="${width}x${height}@${refresh_rate}"
+        replication_source_id=$(echo "$out" | jq -r ".replicationSource")
+        log "[VAR] replication_source_id: $replication_source_id"
+        if [ $replication_source_id -neq 0 ]; then
+            replication_source_name=$(echo "$outputs.[] | select(.id == \"$replication_source_id\" | .name)" )
+            log "[VAR] replication_source_name: $replication_source_name"
+            CMD="kscreen-doctor output.$"
+        done
+        log "[VAR] mode: $mode" 
         priority=$(echo "$out" | jq -r '.priority')
 
+        # 
+
         # Mode (Resolution + refresh)
-        kscreen-doctor "output.$id.mode.$mode"
+        # CMD="kscreen-doctor output.$name.mode.$mode"
+        CMD="kscreen-doctor output.$name.mode.$mode"
+        log "[CMD]" $CMD
+        $CMD
 
         # Position
-        kscreen-doctor "output.$id.position.$posx,$posy"
+        CMD="kscreen-doctor output.$name.position.$posx,$posy"
+        log "[CMD]" $CMD
+        $CMD
 
         # Scale
-        kscreen-doctor "output.$id.scale.$scale"
+        CMD="kscreen-doctor output.$name.scale.$scale"
+        log "[CMD]" $CMD
+        $CMD
         
         # Rotation (map from JSON names to kscreen-doctor options)
+        CMD=""
         case "$rotation" in
-            "1")       kscreen-doctor "output.$id.rotation.normal" ;;
-            "2")     kscreen-doctor "output.$id.rotation.left" ;;
-            "4")      kscreen-doctor "output.$id.rotation.inverted" ;;
-            "8")   kscreen-doctor "output.$id.rotation.right" ;;
+            "1")    CMD="kscreen-doctor output.$name.rotation.normal" ;;
+            "2")    CMD="kscreen-doctor output.$name.rotation.left" ;;
+            "4")    CMD="kscreen-doctor output.$name.rotation.inverted" ;;
+            "8")    CMD="kscreen-doctor output.$name.rotation.right" ;;
         esac
+        log "[CMD]" $CMD
+        $CMD
 
         # Primary / Not Primary
-        echo $priority
         if [ $priority -eq 1 ]; then
-            kscreen-doctor "output.$id.primary"
+            CMD="kscreen-doctor output.$name.primary"
+            log "[CMD]" $CMD
+            $CMD
         fi
 
     done <<< "$outputs"
 }
 
-load_profile_to_outputs $outputs
-
-#########################
-# 2. Restore clone groups
-#########################
+load_profile_to_outputs "$outputs"
 
 clone_groups=$(jq -c '.clones[]?' "$PROFILE")
 
@@ -110,11 +153,14 @@ function restore_clone_groups {
         others=$(echo "$clone" | jq -r '.[]' | tail -n +2)
 
         for o in $others; do
-            kscreen-doctor "output.$o.clone.$primary"
+            CMD="kscreen-doctor output.$o.clone.$primary"
+            log "[CMD]" $CMD
+            $CMD
+
         done
     done <<< "$clone_groups"
 }
 
-restore_clone_groups $clone_groups
+restore_clone_groups "$clone_groups"
 
 echo "Display configuration restored."